Queensland’s measures to support implementation of the Modern Homes standards
The Modern Homes standards will be implemented through a phased approach, with:
- the Livable Housing Design Requirements to be phased in from 1 October 2023
- the new residential energy efficiency arrangements commencing on 1 May 2024.
These standards reflect community expectations that modern homes are comfortable, functional and adaptive to our changing needs.
To ensure Queensland’s effective implementation of the NCC 2022, including the Modern Homes standards, transitional measures and exemptions are included in the Queensland Development Code (QDC):
- an updated Mandatory Part 4.1 – Sustainable buildings (PDF, 371.03 KB) (QDC 4.1)
- a new Mandatory Part 4.5 – Livable dwellings and grading to floor wastes (PDF, 1135.29 KB) (QDC 4.5).
Livable housing design
The new NCC 2022 Livable Housing Design Standard means new houses and units will be designed with accessibility features, such as slightly wider doorways and corridors, 1 shower and toilet with step-free entry, and reinforced bathroom and toilet walls to enable future installation of handrails.
These measures will have a significant impact on householders as they move through the stages of life, whether it be young families, seniors, or someone with a disability.
To support industry’s transition to the livable housing design standard and give industry time to adjust, a new QDC 4.5 will provide:
- an 18-month exemption (until 31 March 2025) from the LHDS for narrow lots (frontage of 12.5 metres or less) and small pre-built houses (under 55 square metres in size)
- clarification that repairs and maintenance do not automatically trigger a requirement to meet the LHDS
- clarification about when major renovations will need to comply with the LHDS
- alternative, cost-effective compliance pathways for step-free showers and grading to floor wastes in wet areas
- flexibility around the location of an accessible toilet when there is no habitable room/s on the entry level.
The 18-month exemption period for the LHDS for narrow lots and small pre-built houses, allows the continued delivery of these lots and houses, while promoting creative and innovative ways to build more diverse and affordable housing.
Other provisions include alternative lower cost compliance options for a step-free shower.
For repairs and maintenance, QDC 4.5 clarifies the building work standards that apply to the work will be the same standards that applied before the repair or maintenance work was undertaken (like-for-like).
Bathroom and toilet renovations will not have to comply with the LHDS where it is not reasonable or practical. For example, if wall framing is not exposed during the renovation, reinforcement does not need to be installed.
If the entry level toilet exemption applies, an accessible toilet must be installed on the first level with a habitable room.
The QDC 4.5 provisions that deal with the LHDS will be phased in from on 1 October 2023.
Grading to non-mandatory floor wastes
The NCC 2022 Housing Provisions now require all floors to be graded to a floor waste installed in a wet area, such as a bathroom or laundry. This does not include a kitchen.
Previously, the NCC 2022 only required floor wastes to be installed and floors to be graded in showers, rooms with urinals and in apartments where water from 1 unit could cause damage to another unit.
The requirement for grading of floors to all floor wastes in wet areas will reduce pooling on bathroom floors and prevent water flowing out of wet areas and causing damage to the rest of the building.
QDC 4.5 will provide less expensive alternative compliance options for the grading of floors to non-mandatory floor wastes (i.e. where there is no requirement to install a floor waste). These include:
- adopting gradients provided by AS 3740:2021 Waterproofing of domestic wet areas
- allowing installation of a linear strip drain or weir at each entrance to the room
- ensuring water from a fixture cannot flow out of a wet area without passing over a graded area of a floor.
The additional compliance solutions will allow industry to select a more appropriate and cost-effective grading to floor waste option that accommodates the homeowner’s budget, aesthetic preferences and is suitable for the specific wet area.
The NCC 2022 grading of floor-to-floor wastes provisions commenced on 1 May 2023. The parts of QDC 4.5 relevant to grading to floor wastes requirements will commence on 22 September 2023.
Generally, building work in Queensland must comply with the building assessment provisions (standards) that applied when a building development application is approved.
However, section 37 of the Building Act 1975 enables a building certifier, in certain circumstances, to apply the previous building assessment provisions. These circumstances include:
- if lawful building work has started before a new requirement commences
- a building development approval was given before a new requirement starts
- a building development application is made before the new requirement starts, and the application is not decided before the amendment commences
- planning for carrying out the work started before a building assessment provision is amended and the building certifier for the building development approval certifies in writing that all the following conditions have been met
- substantial progress has been made on the design of the building, or the design was completed before the amendment
- the design would need to be changed to comply with the amended provision
- the changes needed are not minor changes, having regard to the amendment and the nature of the building work.
A guideline was published to assist building certifiers in applying this transitional provision.
A new non-mandatory Form 77 Variation to building assessment provisions is available to assist building certifiers to document decisions made under section 37 of the Building Act 1975.
Residential energy efficiency
The NCC 2022 residential energy efficiency provisions make important changes that enable more comfortable temperatures in new homes year round, save costs by using less energy to keep homes cool, and tackle climate change by reducing emissions.
To align Queensland with the NCC residential energy efficiency requirements, QDC 4.1 will be updated to:
- remove Queensland’s optional credit for installation of a solar photovoltaic (PV) energy system
- remove the ability to use a 2009 version glazing calculator, in favour of the current calculator
- require compliance with the NCC 2022 star rating requirements in new houses and units.
QDC 4.1 will retain the optional one-star credit for outdoor living areas for new houses and expand it state-wide for new apartment buildings. This optional credit recognises Queensland’s unique outdoor housing design and lifestyle.
The implementation of the new energy efficiency arrangements will commence on 1 May 2024. This will provide industry with sufficient time to adjust to recent changes to software tools that are used to verify compliance with energy efficiency requirements, including the Whole of Home requirements.
The amended QDC 4.1 will commence on 1 May 2024.
- ABCB Handbook for Livable Housing Design
- ABCB Voluntary Standard for Livable Housing Design: Beyond Minimum
- Implementation of step-free entry provisions report (PDF, 2534.69 KB) (step-free path of travel requirements in a suburban context).
- Case studies (PDF, 5878.66 KB) demonstrating practical implementation of the National Construction Code 2022 provisions and exemptions.
Residential Energy efficiency
- Last updated:
- 19 September 2023